AVACOM digital camera batteries contain only high-quality cells that display high performance and have a long service life. The batteries are equipped with gold-plated connectors and the latest control electronics for trouble-free communication with the device. They are also fitted with a number of safety features which prevent overcharging, low-voltage, over-current charging and short-circuit. AVACOM batteries are not just a reliable replacement for your original battery - most AVACOM batteries offer a higher capacity (and therefore longer endurance) than the original battery.
The battery is partly charged at the factory, but its capacity and performance are below 100%. For optimal battery formatting, it is therefore recommended that you repeat the charge and discharge cycle at least 3 times at the beginning. Battery capacity is reduced by a permanent connection to the power supply, so we recommend that you disconnect your device from time to time. If the battery is not in use, store it in a dry place and, after approximately six months, check it and recharge it.
One of the most common causes of battery degradation is when you put a fully discharged battery away and do not use it for a long time. Do not expose the battery to temperatures above 60°C. If the battery is exposed to temperatures below 5°C, charge it only when it reaches room temperature. Only use the battery in devices for which it is designed. Also be careful that the battery is not subject to a short circuit or higher discharge currents. Protect it from mechanical damage, chemical agents and moisture.
Parameters and Specifications:
Intended for:
Kodak
Battery replacement:
KODAK: KLIC-7002
Type:
Li-Ion
Capacity:
540mAh
4.3Wh
Output voltage:
3.7V
Code: | IB373b |
Product Number: | DIKO-7002-623 |
Links: | Producer's Website: |