MULTIPA magnetic LED lighting set, 7-pin, 7,5 m

Wiring harness with C-LED lights and magnetic holders, a universal replacement lighting part with cabling for a trailer, can also be used as portable "temporary" lighting (with the supplied magnets)

• Bayonet connector: NO, the set is permanently connected
• Cable length: 7.5m
• Plug: 7-PIN
• Light mounting spacing: 55mm, using magnets - optional
• Lamp dimensions: 105 × 95mm
• Homologated: E4
• Diode version: 12 / 24V
• Set contents:
• 1× combined C-LED left light, the lamp includes: indicator, brake light, side light and bottom number plate light
• 1× combined C-LED right light, the lamp includes: indicator, brake light, side light and bottom number plate light
• The triangular reflectors can be attached to the lights using the supplied brackets and screws, creating a complete rear lighting system
• Can be used on trailers with a total length, including the drawbar, of a maximum of 7m

Installation instructions:

• Run the electrical wiring under the trailer to the locations specified by the manufacturer, or alternatively along the sides of the trailer (for emergency, one-off lighting)
• Place the rear lamps in the locations specified by the manufacturer, or alternatively, as required
• Ensure the lamps are positioned correctly (arrow facing outwards and the word TOP facing upwards)