METABOND GT Plus for gearboxes and differentials 250ml

Metabond GT Plus metal surface finisher reduces friction and improves lubrication. It's specially designed for use in gearboxes, differentials and industrial drives. It can be used for treating new, part-used and used equipment. It creates an extremely hard and smooth surface that resists friction-induced damage. It reduces friction by a minimum of 60%, resulting in lower wear and less noise. It does not contain chlorine, sulphur, phosphorus, PTFE or ceramic nanoparticles.

Key features

• Volume 250ml
• Suitable for both new and used equipment
• It extends the lifespan of your oil and equipment
• Creates a durable coating

The high antioxidant content prolongs the life of oil. Metabond GT Plus protects all machines that it treats even when there is a significant oil leakage or insufficient lubrication. If used regularly with new equipment, it is guaranteed to triple lifespan. Only use Metabond GT Plus with gear oil prescribed by the manufacturer. 

Use

Add to lubricating gear oil in a 4-6% ratio and apply ideally at every oil change. Do not use with combustion engines, automatic gearboxes or self-locking differentials.

Storage

Store in a dry place at a temperature between -10 and +40°C. After opening, use within 2 years. Use within 5 years of purchase.
Additional information:
Colour code: 7.0 ASTM
Kinematic viscosity at 40° C, EN ISO 3104: 1996: 70 mm2/s
Kinematic viscosity at 100  C, STN EN ISO 3104: 1996: 11.41 mm2/s
Acid number (TAN) ASTM D 664-07: 7.11mg KOH/ g
Corrosive effect on copper plates (100°C, 1 hr.) EN ISO 2160: 2000: 1a - degree of corrosion
Flash Point (Cleveland) STN EN ISO 2592: 2002: 156°C