KEMO Ultrasonic repeller for martens and rodents with 6 high-voltage surfaces

103.49 €
Price Guarantee

KEMO Ultrasonic repeller for martens and rodents with 6 high-voltage surfaces

Is your car a constant target for martens, weasels, and other rodents? Put a stop to these little creatures once and for all with the Kemo M186 ultrasonic repeller. The Kemo M186 ultrasonic repeller emits aggressive ultrasonic pulses that humans cannot hear, but animals find extremely unpleasant. In addition, it is equipped with six high-voltage plates charged to 300V by a capacitor. Upon contact, the animal receives an electric shock that scares it away but does not kill it. Install the plates under the bonnet in the engine compartment around the audio hoses, starter cables, and similar components. The Kemo M186 repeller can also be used in agricultural machinery, tractors, and the like. With the Kemo M186 repeller, you no longer have to worry about unpleasant pests.

Key Features of the Kemo M186 Ultrasonic Marten and Rodent Repeller

  • Kemo M186 ultrasonic repeller for martens, weasels and other rodents
  • Protects the engine and plastic parts of the car
  • Emits aggressive ultrasonic pulses that are unpleasant for animals
  • Also includes six high-voltage plates charged to 300V
  • If touched, the animal will be scared away but not killed
  • The plate recharges immediately
  • Install the plates under the bonnet in the engine compartment
  • If the battery voltage drops below 11.5V, the repeller switches off automatically to avoid draining the car battery
  • Fastens with self-tapping screws or straps in the engine compartment
  • The Kemo 186 is suitable for vehicles with a CAN bus
  • Also suitable for agricultural machinery, tractors and more
  • The Kemo M186 ultrasonic repeller is powered by the car battery
  • An LED indicates correct operation

Acoustic pressure:
Max. 100dB (+- 15%)

Ultrasonic signal frequency:
22kHz (+- 10%)

Ultrasonic signal emission angle:
Approx. 150 degrees

Operating voltage:
12–15V / DC (car battery)

Output voltage:
approx. 200–300V / DC

Repeller current consumption:
On average less than 5mA

Automatic switch-off:
When the battery voltage drops to <11.5V (± 5%)

Cable length:
Approx. 4m

Fuse in holder:
500mA

Operating temperature:
–25 to +80
°C

Dimensions:
125 × 70 × 31mm

Plate dimensions:
40 × 40 × 1.5mm

Cable for terminal 15:
If this cable is connected to +, the marten repeller will switch off. If it is connected to - or has no signal, it will switch on.

Specifications

Usage

Suitable for Martens, Mice / other rodents
Location For cars

Principle

Principle Electronic (ultrasonic)
Power Supply 12 V
Code:  AUPR257800
Warranty: 24 months
Manufacturer information

TSS Group s.r.o, tř. Tomáše Bati 145, 763 02 Zlín-Louky, [email protected]

Show more