CTEK MXS 10 EC

Cold winter evenings when the battery gets the car really hard, is fast approaching. A prerequisite for a carefree start is but a fully charged battery. In the event that you are unsure of the status of this important article of the vehicle it is ideal for you to buy a charger that solves this problem perfectly. CTEK product from one of quality car charger with microprocessor control charging.It has standby power mode and convalescence. Problems with the discharged battery so you can put it behind for good.

Key features

• Stable charging current to 10 A
• To restore deeply discharged batteries
• Battery charger with 12 V
• Designed for batteries with a capacity of 20-200 Ah, up to 300 Ah (for maintenance charging)
• Meets IP65 enclosure
• compact dimensions
• Supplied with a 4 m long charging cable and a protective silicone cover

easy connection

The package includes a connector with terminals for quick connection to the battery. It is particularly handy for all those who are looking for solutions that are quick and easy to mix between different batteries, for example in the workshop. It also pleases its optimum length and colour resolution, which guarantees always flawless involvement.

Under the supervision of the microprocessor

This universal battery charger is microprocessor controlled. Equipped with patented technology osmifázového charging profile.After charging, the charger automatically switches to maintenance, so there is no overcharging and damage the battery. The charger is designed for all types of 12V lead-acid batteries. You will appreciate the function of Supply, which is the power mode, which provides the energy in the time between removing and reconnecting the battery. Disconnecting the battery from the vehicle, you risk losing all settings, including alarm codes, multimedia system and electronics that controls the vehicle's performance.The charger is able to revive even deeply discharged batteries stratified electrolyte.

Notice

• For charging mode Recond your battery must be disconnected from electrical and charging the battery out of the car. It is a mode in which control is performed mixing the electrolyte and battery charger charges the battery at a higher voltage than the other modes. 
• Recond mode can not be used for batteries with gel electrolyte (AGM)
• It is advisable to use it only for deeply discharged batteries, which leads to electrolyte stratification (bottom thicker, thinner at the top). This mode is suitable to use one or a maximum of two times a year.
• If this is not a maintenance-free battery and thus is open lids, it is necessary to leave the lid open for charging.

Additional information:

Types of batteries:
All types of 12V lead-acid batteries (WET, MF, Ca / Ca, AGM and GEL)

Dimensions:
197 × 93 × 49 mm (D x W x H)

Insulation class:
IP65

Weight:
0.8 kg