COMPASS Charger PROFI microprocessor 6 /12V PB/ GEL/AGM

Compass PROFI is an automated microprocessor-controlled battery charger. It is equipped with an LCD display for easier of use, that shows the current battery voltage and the selected charging modes. You can choose between 6V and 12V batteries. If you are not sure, you can also choose to automatically detect the type of battery. You can also set the charging current - 2 A, 4 A and 5.5 A. 
The Re-Fresh function is used to recharge (rejuvenate) the battery with pulses. This function is based on the principle of alternating charging and discharging, which helps to maintain the optimum condition of the battery. 
When the charging is complete, the charger automatically switches to its maintenance mode, thus avoiding overcharging and subsequent damage to the battery. The charger is designed for all types of 6/12V batteries filled with electrolyte (maintenance-free GEL, maintenance-free AGM, MF, VRLA, maintenance PbWet and PbCa).

Recommended Charging Modes:

• 2 Amps - for batteries up to 30Ah (motorcycles, quads)
• 4 Amps - for batteries up to 60Ah (ordinary passenger cars)
• 5.5 Amps - for batteries up to 120Ah (vans, SUV)

Additional Information:
For Rechargeable Batteries:
6/12V, 4-120Ah
For Battery Types:
GEL, AGM, MF, VRLA, PbWet, PbCa
Nominal Input:
230V, 50 Hz/87W
Nominal Output:
6V mode: 7.2V = 2; 4; 5.5 A (ef.)
12V mode: 14.5V = 2; 4; 5.5 A (ef.)
Cover:
IP 20
Efficiency:
85%
Operating Temperature:
-20°C to + 50°C