ASROCK X58 EXTREME3

Quality of Asrock motherboard based on Intel X58. Plate is fully prepared for modern šestijádrové Intel Core i7 and Core i7 Extreme. DDR3 memory modules is ready to six slots into which can involve a total of up to 24 GB of 2000 MHz maximum tact. There is also the standard for today's graphics cards, and that is the PCI Express x16. On board are even two such slots and are supported by multi-GPU integration, namely ATI CrossFireX and NVIDIA SLI. For additional expansion options are on the board two classic PCI slots and one PCI Express x1 slot.

This desk boasts modern Serial ATA III, 6 Gbps, USB 3.0 connectors. There is also, however, neither older IDE interface. Of course there is an integrated Gigabit network card and the 8-channel sound card. USB ports on board and enough to please the combined USB/eSATA III 6 GB/s (even power off).

Plate boasts one of the very advantageous properties. If you have a good home cooler on the CPU socket LGA 775, it can replace the reference cooler that you purchase with the processor.

Parameters and specifications:

Supported Processors:
Intel Core i7 and Core i7 Extreme Edition
Socket 1366

Chipset:
Intel X58
ICH10R

Memory:
6x slot for memory modules, DDR3 2000 (OC)/1866 (OC)/1600 (OC)/1333 (OC)/1066 non-ECC, un-buffered memory
Support for DDR3 ECC un-buffered memory with Intel Workstation Xeon 3500 Series 1S
Up to 24 gigabytes
Triple channel support
Support for Intel Extreme Memory Profile (XMP)

Expansion Slots:
2 x PCI Express 2nd0 x16 slot (blue @ x16)
1 x PCI Express x16 slots (white @ x4)
1 x PCI Express x1 slot
2 x PCI slot
Support ATI CrossFireX and Quad CrossFireX
Support NVIDIA SLI and Quad SLI

Disk controller:
2 x Serial ATA III 6.Gb/s connectors, support for hardware RAID (RAID 0 and RAID 1), NCQ, AHCI and "Hot Plug" - Marvell controller SE9128
6 x Serial ATA II 3 Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 10, RAID 5 and Intel Matrix Storage), NCQ, AHCI and Hot Plug
1 x ATA133 IDE connector (up to 2 IDE devices x)
1 x FDD connector

Audio:
7.1 Channel HD Audio with Content Protection
VIA VT2020 Audio Codec
Premium Support Blu-ray audio

Network Card:
PCIE x1 Gigabit LAN 10/100/1000 Mb/s
Realtek RTL8111DL
Support Wake-On-LAN

USB 3.0:
NEC USB 3.0 controller - 2 x USB 3.0/2.0 ports (rear panel)

Rear I/O panel:
1 x PS/2 mouse
1 x PS/2 keyboard
1 x Coaxial SPDIF Out port
1 x Optical SPDIF Out port
5 x USB 2.0
1 x eSATA Powered III/USB 2.0 connector
2 x USB 3.0
1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)
1 x IEEE 1394 Port
1 x Clear CMOS with LED Switch
HD Audio connectors: Side Speaker/Rear Speaker/Central/Bass/Line in/Front Speaker/Microphone

Connectors on the board:
6 x Serial ATAII 3 Gb/s
2 x Serial ATA3 6 GB/s connector
1 x ATA133 IDE connector
1 x FDD connector
1 x IR header
1 x COM port header
1 x header HDMI_SPDIF
1 x IEEE 1394 header
1 x TPM header
1 x Chassis Intrusion header
1 x power LED header
CPU/Chassis/NB/Power FAN connectors
24 pin ATX power connector
8 pin 12V power connector
CD in header
Front panel audio connector
2 x USB 2.0 headers (additional 4 USB 2.0 ports)
1 x Dr Debug

Package Contents:
1 x ASRock SLI_Bridge_2S Card
Installation Guide
Software CD
I/O cover
Floppy/ATA 133 cables

Board Size:
305 x 244 mm, ATX