APC Smart-UPS SRT Li-Ion 1000 VA RM 230V rack-mount, network card

The worst thing that can happen to you when you work on a computer is a power outage just before you saved that important document. The unsaved work is irretrievably lost, and you have to start again from scratch. Such tragic scenarios can be prevented by the APC Smart-UPS SRT Li-Ion 1000 VA RM 230V rack-mount, network card backup source, or UPS. This hardware is practically a large battery that powers all types of electronics. The APC Smart-UPS SRT Li-Ion 1000 VA RM 230V rack-mount, network card UPS battery backup features the Online with double conversion design approach. Off-line is seen as the most basic form. The line interactive UPS also adds data line surge suppression . The best variant is the double conversion online UPS, where the input voltage is fed to a rectifier, with output being supplied by an inverter.

APC Smart-UPS SRT Li-Ion 1000 VA RM 230V rack-mount, network card Backup Power Supply Key Features

• Backup power supply type: Online with double conversion
• Actual performance: 900 W
• UPC operation at full load for 31,8 min
• 8 sockets (C13), as used for monitors, printers, or amplifiers
• 0 Schuko power plugs

An important parameter is the UPS run time during outages. This is governed by the energy consumption – for example, at half-load (50%), the UPS power time can last up to three times as long. The load of the backup source determines the operating time, which at maximum load is 31,8 min and at a load of 50%, it's 60,4 min. It is therefore necessary to estimate the energy consumption of the connected appliances and ideally to have some spare energy in reserve. The APC Smart-UPS SRT Li-Ion 1000 VA RM 230V rack-mount, network card specifies the apparent power as 1000, but realistically, the actual usage matches the value of 900 W.