APC Smart-UPS 3000VA LCD RM 2U 230V For Stand, With Network Card

You've probably already experienced the nightmare of a power supply interruption a few seconds before the entire file was saved. Your document has disappeared, and you have to start again from nothing. Such catastrophic scenarios can be forestalled by the APC Smart-UPS 3000VA LCD RM 2U 230V For Stand, With Network Card UPS. This hardware is practically a battery reservoir that provides power for all types of computers and devices that need electricity to function. The APC Smart-UPS 3000VA LCD RM 2U 230V For Stand, With Network Card UPS has the Line interactive design approach. Off-line is seen as the simplest form when power fails because it connects to the battery and disconnects from the mains power. The line interactive UPS also adds power protection to prevent damage from electrical surges from the grid.

APC Smart-UPS 3000VA LCD RM 2U 230V For Stand, With Network Card Backup Power Supply Key Features

• Backup power design: Line interactive
• Actual performance: 2700 W
• At maximum load, the UPC will run for 3,2 min
• 8 sockets (C13), as used for monitors, printers, or amplifiers
• 0 classic Schuko plugs

The most important parameter is the UPS run time. This depends on the power consumption of the connected devices – for example, at half-load (50%), the backup time will last a longer amount of time. The load of the backup source governs the operating time, which at full load is 3,2 min and at half the energy consumption, it is 11,5 min. It is therefore crucial to calculate the energy consumption of the connected electronics and ideally to add some spare power left. The APC Smart-UPS 3000VA LCD RM 2U 230V For Stand, With Network Card measures the apparent power as 3000, but in reality, the actual power usage is 2700 W.