MICROSTAR K9ND Master-S4R

Modern executive dual motherboard for up to two AMD Opteron processors with a cap based on Socket F čipsetu nVidia nForce Professional 3600 MCP.Plate supports HyperTransport technology and processors with 2 MB L2 Cache memory.The dual memory controller allows mounting to 64 GB of memory ECC Registered in sixteen slots and supports Chipkill technology, which allows the 4-bit to correct errors in the ECC memoirs with architecture x4.The board is designed for powerful workstations and high performance servers.
The board is an integrated video card Radeon Mobility 7000-M with 16 MB of SDRAM memory and two gigabitové network card.Expanding allows a PCI Express x8 slot and one HTX + x8 PCI Express slot for Infini-band card.Two USB ports are led out on the back of the board, two more may be out of the header on the motherboard.To connect hard drives are available one channel Ultra DMA 133/100/66/33, four Serial ATA II ports and four SAS ports and a total of up to ten devices.
The parameters and specifications:
Applicable processors:
2 x Socket M processors for AMD Opteron Dual-Core
Support HyperTransport technology
Support for processors with 2 MB L2 Cache memory
Čipset:
nVidia nForce Professional 3600 MCP
The system bus:
Up to 1 GHz
RAM:
Slots:16 slots for memory modules DDR2 400 / 533 / 667 MHz
Suitable type of memory:Only modules ECC Registered
Capacity:Each module 128 MB to 4 GB
The maximum amount of memory:up to 64 GB DDR2
Dual channel:two identical memory modules into a single bank
Support Chipkill technology
Kingston memory is recommended for their excellent reliability and perfect compatibility.
Extension slots:
1 x PCI Express x8
1 x HTX + x8 PCI Express slot for Infini-band card
Integrated video card:
ATI Mobility Radeon 7000-M with 16 MB SDRAM
Controllers discs:
1 x Ultra DMA 133/100/66/33 (max2 facilities)
4 x Serial ATA II (max4 devices)
4 x SAS LSI SAS1064E (max.4 devices)
Integrated network card:
2 x 10/100/1000 Mbit / s (nForce Professional 3600 MCP and Marvell 88E1116)
Connectors on the rear panel:
1 x serial port
1 x PS / 2 keyboard
1 x PS / 2 mouse
1 x VGA
2 x USB
2 x RJ-45
Power:
SSI
Connectors:1 x SSI 24 pins, 1 x SSI 12 in 8 pins, 1 x SSI 5 / 12 in 4-pin
For the correct functionality is necessary server cabinet with a good source!Enforcement resources should be at least 600 W.
The size of plates:
305 x 330 mm SSI EEB 3rd0 E-ATX